Arbin MZTC多温区温箱 允许研究人员在多个完全独立的小型温度环境仓内进行电池测试，为实验提供的极大的灵活性。
- 温度范围为[环境-10]至60摄氏度。
- 配备不同夹具的抽屉式托盘，适用于所有类型的电池，装卸方便。
- 可添加温度传感器，将其安装在每个电池上。

Arbin的 第三方温箱接口模块（MTCI） allows the Arbin tester to set the chamber temperature and record chamber reading automatically during the test and synchronize all data.  This is compatible with many chamber brands, but please consult your Arbin sales engineer for details.

Arbin提供 热电偶 和 热敏电阻 sensor types to measure and record temperature during testing.  They function independently so the user may flexibly assign them in any configuration with the main charge/discharge test channels.  All data is automatically synchronized with the cell charge/discharge test data.  Available sensor types include:
- K-型热电偶
- T型热电偶
- PT100热敏电阻（精度±0.5℃， PT100热敏电阻输入与Arbin MZTC多温区温箱兼容.)
- 10kΩ热敏电阻（NTC）

辅助电压输入（auxV） may be added to any Arbin system to measure the voltage of additional reference electrodes in a multi-electrode cell or experiment.  Any number of auxV inputs can be added to the Arbin system.  They function independently so the user may flexibly assign them in any configuration with the main charge/discharge test channels.  All data is synchronized with main Arbin test data.

数字输入/输出（Digital I/O） channels allow the Arbin system to send and receive a digital relay (high/low, on/off) signal it interface with external hardware.  They function independently so the user may flexibly assign them in any configuration with the main charge/discharge test channels.
数字I/O通常用于与外部硬件信号或开关的互动操作，如报警信号采集、开关风扇、阀门等信号的输出等。

模拟输入/输出（Analog I/O） channels allow the Arbin system to send and receive a (-10)-10V voltage signal or to interface with external hardware.  They function independently so the user may flexibly assign them in any configuration with the main charge/discharge test channels.
模拟I/O通常用于与外部硬件互动，如4~20mA标准变送器的信号处理、变频水泵的等幅控制信号等