简体中文 
English 
한국어 
Deutsch 
文章
Arbin at The Battery Show North America 2025 — Empowering the Future of Energy Innovation
Arbin Instruments was honored to participate in The Battery Show North America 2025 in Detroit — the largest gathering of professionals driving innovation in advanced battery and electric vehicle technology. The event brought together global leaders, researchers, and manufacturers to discuss emerging trends, sustainability, and the technologies shaping the future […]
Moments of Collaboration: Arbin’s Successful Engagement at ICNaB 2025
The event photos from ICNaB 2025 clearly showcase Arbin’s strong presence and successful customer engagement. You can see our team interacting with attendees, demonstrating technology, and explaining solutions to interested visitors. The images capture genuine exchanges — customers asking questions, sharing ideas, and engaging with Arbin staff. Overall, the photos […]
Overview about what Arbin products to choose-1
Arbin’s Battery Testing Systems Arbin’s main products are advanced battery testing systems that accurately simulate real-world charge and discharge cycles. These systems help researchers, engineers, and manufacturers evaluate battery performance, safety, and lifespan under a wide range of conditions. Key Specifications Two of the most important specifications of a testing […]
Arbin to Exhibit and Present at Batteries Event Lyon 2025 — Join Us in November
We’re excited to share that Arbin Instruments will be attending Batteries Event 2025 in Lyon, France from November 4 to 6, 2025. Batteries Event is one of Europe’s premier gatherings for the full battery value chain — from raw materials and cell design to manufacturing, testing, second-life, and recycling. Batteries […]
10th International Conference on Sodium Batteries (ICNaB) 2025 in Sydney
We are excited to announce our participation as a sponsor at the 10th International Conference on Sodium Batteries (ICNaB) 2025, hosted by the University of Technology Sydney. The event location is Amora Hotel Jamison Sydney, 11 Jamison Street, Sydney, NSW 22000. This prestigious event serves as a vital platform for leading […]
How to run cyclic voltammetry(CV) using Arbin Tester
Arbin continues to power innovation in many areas of battery research, including electrochemical experiments such as cyclic voltammetry (CV). Arbin equipment is designed to perform electrochemical experiments with the precise circuitry required for linear voltage ramps, while the MITS software gives the user a wide variety of options to create […]
How to perform DC Internal Resistance measurement with Arbin?
Mechanism explanations: Arbin’s MITS software uses pulse method to calculate IR. In order to achieve better accuracy, the software measures the IR 10 times and takes the average. The pulse looks like the graph bellow: IIR is the amplitude value T2 is the extra control value1 I0 is the offset […]
Enhancing Battery Testing Safety with a Door Switch Interlock System
I. Purpose and Applicability Battery testing—whether for electric vehicles, consumer electronics, or industrial systems—demands strict safety protocols. One often overlooked but critical element in test chamber safety is the door switch interlock system. This simple yet powerful mechanism helps prevent injuries, equipment damage, and test data corruption. In this article, […]
Integration of Arbin Instruments with Gamry Potentiostats for High-Frequency EIS up to 2 MHz
According to the standard specifications published by Arbin, integrating a Gamry device with an Arbin system typically limits the device’s original frequency capability from 2 MHz down to 100 kHz. However, in this article, we will introduce a solution that allows the system to retain the full 2 MHz frequency, with some trade-offs […]
如何使用 Arbin 根据 IEC 61960 执行内部电阻测量？
红外测量对于深入了解电池至关重要。测量电池红外的方法有很多，即有很多标准。本文将介绍 IEC 61960 标准以及如何使用 Arbin 设备实现该标准。IEC 61960 电池红外标准：在该标准中，[...] 的放电脉冲。
Integrated Electrochemical Impedance Spectroscopy (EIS) With Arbin Charge/Discharge Channels
Introduction Electrochemical Impedance Spectroscopy (EIS) is a foundational diagnostic technique for evaluating battery health, internal resistance, degradation mechanisms, and electrochemical behavior over time. However, EIS is traditionally limited by hardware complexity and high per-channel cost, making it difficult to scale across large battery test systems. To address these challenges, Arbin […]
如何使用 ARBIN EOL 测试保护电路模块 (PCM)
I.目的和范围：保护电路模块 (PCM) 是一种重要的电子元件，负责监控和保护各种应用设备（从小型消费电子产品到大型工业设备）。其核心功能是通过防止过度充电、[...] 等危险情况，确保电池和设备的安全。
辅助电压测量
导言 Arbin 辅助电压输入模块可为电池测试应用提供精确、高分辨率的电压监测，这些应用需要测量标准 I/V 通道以外的电压。典型用例包括监测较大电池组中的单个电池或模块电压、测量三电极电池中的参比电极，或将 BMS 数据与直接 [...] 数据进行比较。
辅助温度测量
简介 电池温度测量对于评估现代测试环境中的安全性、寿命和性能至关重要。Arbin 支持三种主要传感器技术--热电偶（T 型和 K 型）、热电阻（PT100）和热敏电阻（10kΩ）--每种技术都可通过专用辅助输入模块获得。这些传感器可在整个电池研发过程中实现精确的温度控制、监控和安全逻辑 [...]
根据实际容量恒定 C 速率，而不是使用 Arbin 循环器恒定电流
众所周知，电池的容量会随着充放电循环的进行而下降。如果我们将充放电电流设定为一个固定值，如 1A、2A......，每次循环的时间就会逐渐缩短，原因很简单，因为电池的容量在减少：循环时间 = （充电容量 + [...]
在一个环境温控箱中同步不同电池的充放电通道
MTCI 简介 Arbin 的 MTCI（Multi-Temperature Chamber Interface，多温室接口）模块可与第三方环境模拟室进行无缝、复杂的集成，从而可在 Arbin 测试计划内直接控制温度和湿度设定点。这种简化的设置使测试工程师能够在编程和调整电气循环参数的同时编程和调整环境条件，从而消除了 [...] 的需要。
Arbin MITS 软件用于柔性电池测试的公式和变量
软件允许用户使用变量而不是具体的控制值来控制测试（例如，系统可以使用 "上一步最大电压 "作为下一步的控制类型，而不是使用 4.2V 进行控制）。- 也可以使用这些 [...]
电池多点温度测量
温度监控在电池测试中的重要性 准确的温度监控是电池测试的关键环节，可确保安全性和数据完整性。其中一个关键应用是在测试过程中防止热失控或过热。当电池超过预定温度阈值时，测试必须[......］
如何检测镍氢电池是否充满电
电压、温度和 Delta-V：镍氢电池充满电的指标 镍氢电池（NiMH）是一种可充电电池，使用氢氧化镍（NiOOH）作为正极（阴极），吸氢合金作为负极（阳极）。与镍镉（NiCd）电池相比，镍氢（NiMH）电池 [...]
电动汽车 (EV) 电池测试应用说明
目的和适用性：本应用说明介绍了一系列用于评估电动汽车（EV）电池寿命性能的测试。Arbin 与全球电动汽车行业领先企业合作，为各种尺寸的电池、模块和电池组提供全面的电池测试解决方案。