Articles

How does weather affect the electrical grid?

By Arbin Team | March 15, 2021

With a large majority of power outages caused by weather events, it is crucial to create a system that can hold up against them and recover as soon as possible. Find out more about how Arbin’s equipment supports the grid storage industry.

What are some different types of energy storage?

By Arbin Team | March 10, 2021

Each type of energy storage device has their advantages and limitations. Arbin Instruments has high quality equipment to test different types of solutions.

How Micromobility is Changing How We Move

By Arbin Team | March 1, 2021

Micromobility solutions will continue to reshape our relationship to transportation and consider its impacts on the environment. Arbin is committed to being at the forefront of battery testing, innovating and improving technology for battery materials research, testing and developing.  

The Clean Energy Shift

By Arbin Team | February 18, 2021

The US renewable energy industry has been growing steadily in the past two decades. From 2000 to 2018, renewable energy grew 100% and in 2020, renewable sources made up 11.4% of the country’s energy source. With the government’s new initiative for the power-sector to be decarbonized by 2035, the shift […]

Is EV fast-charging finally viable?

By Arbin Team | February 12, 2021

The availability of fast-charging will be one of the biggest drivers for electric vehicle adoption. Current public direct current chargers can charge a vehicle up to 80% in half-an-hour to an hour — still quite a long time compared with the few minutes it takes to refuel an ICE vehicle. […]

The Advantages and Challenges of Urban Air Mobility

By Arbin Team | January 29, 2021

While electrifying road vehicles – cars, buses, bikes – are widely talked about, one type of EV is slowly paving its way into the world: eVTOL or electric vertical takeoff and landing vehicles. Like a helicopter, eVTOLs do not require a runway to land or takeoff, making it a good […]

3 Crucial Ways AI Can Assist Battery Development

By Arbin Team | January 19, 2021

Artificial intelligence has been changing how the world works for many years now. From algorithms that optimize production, to voice activated virtual assistants on a smartphone or smart speaker, AI is able to optimize and automate processes to make them more efficient and productive. How can AI improve battery research […]

The Race to Self-Driving Cars

By Arbin Team | January 12, 2021

Seemingly straight out of a futuristic sci-fi movie, self-driving cars may soon be a reality. Multiple big-name companies are racing to release robotaxis – self-driving cars meant to ferry passengers between destinations. Zoox, a self-driving car company acquired by Amazon earlier in 2020 unveiled its robotaxi in December after years […]

30th Anniversary- Celebrating the Past and Looking Towards the Future

By Arbin Team | January 6, 2021

This year will mark a big milestone for Arbin Instruments, as the leader in the battery and energy storage testing space will turn 30. Learn more how Arbin can help you in your battery testing needs.

5 Criteria to Assess Battery Materials

By Arbin Team | December 21, 2020

With researchers testing different materials for a fresh take on the battery, how should we assess whether a certain material is a viable option? Integrating materials like silicon, graphene, and even sodium into battery chemistries is currently being studied. Here are 5 factors to consider when assessing whether a certain […]

The Role of Batteries in an IoT Future

By Arbin Team | December 10, 2020

What is the “Internet of Things”? Our world is more connected than ever with the help of the Internet of Things (IoT). IoT refers to the multitude of “things” connected to the Internet, collecting and sharing information or allowing users to perform or initiate functions without even being physically present. […]

MIT Study: Second Life Batteries Deliver Benefits to Grid Storage

By Arbin Team | December 2, 2020

There’s big news in the battery world. A new modeling study from the Massachusetts Institute of Technology (MIT) reported that second life batteries from the electric car industry could be reusable for grid storage in solar operations. As electric vehicle (EV) adoption grows, and with states like California phasing out gasoline-powered vehicles, there […]

What Are Cold-Charging Batteries?

By Arbin Team | November 25, 2020

Cold can be a threat to car batteries. Drivers in below-freezing temperatures routinely must deal with dead batteries that need a jump. However, researchers at Penn State University developed a solution to this problem. The new battery they developed has an extra material layer that enables cold charging. How the Cold-Charging Battery […]

The Road to Lightweight Batteries

By Arbin Team | November 10, 2020

Weight is a critical factor in the development and advancement of portable and mobile battery-based technology. The gradual reduction in size and weight of the battery has allowed the adoption of mobile technology to flourish in the past few years. Take the cell phone as an example, the first portable […]

Examining the Benefits of Graphene Batteries

By Arbin Team | October 29, 2020

You’ve likely heard of some common battery types, such as lithium ion, that are helping to power the future. However, there’s a new contender for most-promising battery solution – graphene. Graphene batteries leverage their namesake material, which sees carbon atoms bind together in a honeycomb lattice pattern to form an […]

Why is it important to have a Battery Management System?

By Arbin Team | October 12, 2020

A battery management system allows users to monitor individual cells within a battery pack. As cells work together to release energy to the load, it is crucial to maintain stability throughout the whole pack. This is where a battery management system (BMS) comes into play. A BMS allows for constant […]

Tesla’s Upcoming Battery Innovations

By Arbin Team | October 5, 2020

Tesla’s Battery Day, where upcoming projects and innovations are announced to investors, was held at the end of September. There were two anticipated announcements: the million-mile battery and a battery price point of $100/kWh, the price at which analysts believe would officially place Electric Vehicles on par with Internal Combustion […]

MRI Scanning and Batteries

By Arbin Team | September 30, 2020

One of the biggest challenges in the development and optimization of battery technology is difficulty in observing what’s happening inside of the battery itself. However, there’s a new ally in the movement toward the future of energy storage – magnetic resonance imaging, also known as MRI. This technology, which commonly […]

Batteries: A Day in the Life

By Arbin Team | September 24, 2020

You may not realize it, but batteries – and the latest innovations in the battery industry – impact nearly every part of your day-to-day life. Batteries have always helped power the world, but their applications and importance are growing all the time, particularly in the wake of movements for cleaner […]

Introduction to Supercapacitors

By Arbin Team | September 15, 2020

Though most common, chemical batteries are not the only way to store energy. Another device that is constantly being researched and improved is the supercapacitor. The supercapacitor stores electricity as static rather than chemical energy. While they can’t match up to batteries in energy capacity, they do have clear advantages […]

Scroll to Top